Talk about making cement with calcium carbide slag
The calcium carbide slag is first washed with water to remove the ferrosilicon lump, and the coal, loess, and iron slag are sent to the mud mill at a weight ratio of 16:16:5, and water is continuously added during the grinding. Then, the calcium oxide-containing slurry is evenly prepared from the calcium carbide slag and the mud, dehydrated, dried, and crushed, and then shaped into a ball of a certain size, sent to the shaft kiln, calcined, crushed, and ground into cement.
The above content comes from the Internet. For more calcium carbide information, you can also follow: http://www.tjtywh.com/
The above content comes from the Internet. For more calcium carbide information, you can also follow: http://www.tjtywh.com/
